Rapier Loom
    2. GA731-II Rapier Loom

      It is weaving machine used to weave various natural fibers such as cotton, wool, silk, and flax, as well as man-made fibers, and synthetic fibers. The GA731-II series rapier loom is a reflection of our outstanding expertise and decades of manufacturing experience. To allow for multiple functionalities and optimized cost-performance ratio, the loom with mature technology and stable functioning has been devised. It is suitable for fabricating natural, man-made, and synthetic fibers.

    2. RFRL20 Rapier Loom

      Nominal reed width: 190, 210, 230, 260, 280 cm.
      Weaving Capacity: Cotton or synthetic fiber yarn 1.2Ne-120Ne, Slub yarn or worsted yarn 1.5Nm-100Nm.       The RFRL20 series rapier loom utilizes the relutance motor to enable fast start and low energy consumption. Thanks to the stepless speed control, the machine is able to accomplish speed change automatically throughout the weaving process while operating at rotational speeds ranging from 380 to 450 rounds per minute.

    2. RFRL30 High Speed Rapier LoomThe RFRL30 high speed rapier loom allows a maxium of 1500m long weft to fill in the tightly stretched, lengthwise warp per minute. Its maxium weaving widths range between 170cm and 360cm. This series of loom can perform various fabricating tasks, such as weaving cotton fabrics, denim cloth, worsted fabric and slub yarn, rayon, synthetic fiber, silk fabric, corduroy, cotton fabrics and cotton blend fabrics (for indoor decoration), linen fabric, lightweight and medium-thick filter cloth (for industrial use), and fiberglass.
    2. RFRL31 High Speed Rapier Loom

      It is used for weaving cotton or man-made fiber, slub yarn or worsted yarn and filament.
      It is with jacquard shedding system.       The RFRL31 energy efficient type high speed rapier loom inherites the benificial features of previous RFRL30 series by incorpoarting the switched reluctance drive system into its motor. This motor assembly delivers high power factor which is desirable for energy saving.

Terry Rapier Loom
    2. RFTL60 High Speed Terry Rapier Loom

      It is for weaving terry towels as well as French Terry cloth.
      Loop pile height 0-24mm.       The RFTL60 high speed terry rapier loom can reach a top rotational speed of 550 rounds per minute while delivering maximum weaving speeds ranging between 400 and 450 rounds per minute. This type of weaving machine employs the moveable reed motion and electronic control for pile formation. The maximum distance that a single thread of weft can travel is 24mm.

    2. HST Series Terry Rapier Loom

      The loom machine is for weaving natural fibers such as cotton, wool, silk, and flax, as well as rayon. The weft insertion and beat-up motion is created by the movement of conjugate cams. In the weft insertion process, a flexible rapier with steel tape is used to carry the weft yarn through the middle of the shed. It never comes so close to the weft yarn or warp yarn as to cause damage to them.

Air Jet Loom
    2. RFJA10 Air Jet LoomThe RFJA10 air-jet loom is suitable for weaving natural, synthetic, artificial, and mixed fiber yarn. It is commonly seen in garment, decorative, and indusrtical applications. This machine type can reach high rotational speeds ranging between 600 and 800 rounds per minute. Its digital control system allows for convenient operation while the professional, new appearance design along with the eye-pleasing color combination creates a tidy, attrpositive look.
    2. RFJA12 Air Jet LoomThe RFJA12 air-jet fiberglass weaving machine comes with a specifically designed, novel electronic control system. Equipped also with a professional weft-yarn drawing system, the loom allows the weft pick to be drawn quickly through the warp. Its rotational speed ranges from 650 to 700 rounds per minute. The maximum price to performance ratio as well as the leading technology will turn weaving a simpler, less costly work.
    2. RFJA20 Air Jet Loom

      The air jet loom is to weave natural, synthetic, rayon and blended fiber yarns into apparel, upholstery, and industrial fabrics. The weaving guidance system monitors the operating status of the loom and guides it to adopt the most suitable process for weaving quality fabric. Based on the air jet loom condition and weave specifications, the system can automatically set appropriate parameters.